> For the complete documentation index, see [llms.txt](https://ogs.gitbook.io/ogs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://ogs.gitbook.io/ogs/spoofer-setup.md).

# Spoofer Setup

### **1. Spoofer Setup BO7 Products**

* Make sure your system matches the required msinfo32 configuration
* These values must appear exactly as listed

### **2. Hyper‑V Settings**

* Hyper‑V – VM Monitor Mode Extensions: Yes
* Hyper‑V – Second Level Address Translation: Yes
* Hyper‑V – Virtualization Enabled in Firmware: Yes
* Hyper‑V – Data Execution Protection: Yes

### **3. Virtualization & Security**

* Kernel DMA Protection: Off
* Virtualization‑based Security: Not enabled

### **4. Quick Tips**

* Enable Virtualization (VT‑x / SVM) in BIOS
* Run the loader as Administrator

<figure><img src="/files/bBOmFva36qlPKkQzIVpB" alt=""><figcaption></figcaption></figure>